Parts for sale.can pick up this weekend.make offer.

[richc]

[img]Hi guys, I’m cleaning out the garage of left-over parts from the build. I’m ready to deal. Here is a list of items I’m selling. Everything is make offer. I might also have some small parts not listed. Ask me what you need.

I have a set (4) of torque thrust D rims with the gray painted insides. They are in good shape 15 x8.5 and 15x 7.They have standard back spacing. Have 2 sets of the plastic center cover. A few curb dings but not bent. Would be a good economical starter set. They still look nice.

An IDIT steering column. new but unfinished and real long. It can be shortened to any length (possibly by me.I have done quite a few).Would probably work good for a truck. Also have a used steering wheel and adapter for it.

The large oval single carb cobra air cleaner set with filters.

Some used but good single master cylinders.US brake 3/4 "and 1".

A clutch set up for 5.0. New McLeod pressure plate and clutch plate, ford bell housing,50 oz. flywheel.
I believe the clutch set is a street/strip set up with organic on one side and bronze on the other. Brian showed some interest in it also. He’ll have first choice. If he passes it's for sale.

9 in. rear end housing with spring perches cut off. Probable came from a ford car. It's stripped and has light surface rust. Also have a complete good used explorer rear brake set up for it. It has no center section.it does have large diameter axels included. I think 32 spline.

2 standard Mustang II front brake rotors.

Horizontal oil filter adapter And a remote filter bracket.

A Set of ( I think )Superformance sway bars new with hardware.

A set of standard chrome upper A arms.

Standard galvanized fuel tank fill tube.

MonroeMatic front shocks that came standard with kit. They work ok.

A set of blown Alden Eagle shocks. Could be rebuilt. A set of 250 rear 10" springs.

New: Lokar E brake handle.

Melling HV oil pump .Used but taken off. Was never on the road. Too much oil pressure

Set of standard big latch belts.no shoulder belts with them.

3 aluminum billet V belt pulleys that I don't know what they are to. Maybe water pump or balancer.

A set of side pipes. One pair of the ceramic coated ones that have the smooth 90 deg. bend. Used and good shape but baffles rattle. Can be screwed or welded to stop that. Also have a pair of unfinished sharp 90 deg. bend side pipes that need the outlet pipe welded on and cleaned up.

I'll accept all reasonable offers and package deals. Might do some trading depending on what you got. I do guns too.

I live very close to Lone Star and can bring them there Fri. or Sat. if you want . Anyone can also make a deal elsewhere.

Can call text or email for details, specs ,and or pictures. Looking to sell and not hang on to for life.817-946-2439
Thanks, Rich
[/img]

[KenC]

Can you provide some dimnesions/pictures of sway bars?