| |
Here’s a package deal that leaves you ready to drive instead of scavenging for parts. Just add your:
- Engine/Transmission
- Rear End Differential
- Wheels/Tires
- Paint
- & Battery
Frame: Completely welded 2”x4” boxed steel w/internal & external gussets.
- Includes 4” dropped foot & seat floor pans
- Accommodates any small/big block Ford or Chevrolet V8 motor.
- Accommodates any standard or automatic transmission
- Includes passenger side roll bar mounts
Body: 6 oz. Hand laid 1/4” Vinyl Ester self-supporting composite body that has been Triax woven for added strength.
- Doors, Hood, & Trunk are doubled lined for high strength. Pre-trimmed & ready for installation
- All 4-fender wells are pre-molded in place
- Added inner fender rock protectors –prevents paint staring caused by road debris
- Complete trunk floor and rear wall are pre-molded in place
- Cockpit floor & transmission tunnel have been pre-molded in place
- Improved foot box space
- Engine firewall is also pre-molded in place
- Adhesive backed foam insulation
- Includes 6-way adjustable solid Mg-Al composite door hinges w/brass bushings
- Includes improved Hidden hood & trunk hinges
- Includes original style front & rear quick-jack bumpers
- Includes dual steel door beams
Complete Front Suspension: Unequal length control arms w/coil-over shock suspension. Everything needed to assemble is included.
- 15:1 manual rack & pinion w/inner & outer tie rod ends
- Steering rack bushings
- Steering joints & steering shaft
- Ididit Inc. tilt steering column –pre wired w/blinker & flasher controls
- 14” Grant steering wheel
- Steering column mounting brkt
Complete Fuel System/Parts: This assembly provides everything from the gas cap to the lines, and is designed to work with carburetors or fuel injection systems. Manual or electric external fuel pump required.
- 17 gallon polyethylene collapsible fuel tank w/polished stainless steel mounting straps & hardware, vent hose, fittings, and fuel level sending unit
- Fuel lines, connectors, filler neck
- Hose clamps and clips
- LeMans style polished aluminum self-pressurizing fuel cap, gasket, and hose to tank
- In-line fuel filter
Complete Cooling System/Parts: Electric cooling fan, radiator, and mounting hardware.
- SPAL brand name electric fan & fan relay –includes all mounting hardware
- Aluminum radiator w/cap
- Radiator mount kit
- Cool Flex brand name flexible chromed radiator hoses & fittings
- Overflow tank
Engine Accessories/Side Exhaust/Mounts: The LS427 Competition kit is configured to accommodate multiple engine and transmission configurations.
- Engine mounts (select- Ford: 302, 351W, 351C, 4.6L, 390/427/428, or 429/460) (Chevrolet- 327, 350, 454) with fasteners.
- Transmission mounts (select- 4, 5, or 6 speed standard shift, or C4, C6, turbo 350/400, or 700R-4 automatics
- Headers –Mandril bent 4-into-4 bare steel
- Side pipes –4-into 1 w/mounting hardware
Gauges, Dash, & Electrical Assembly: Choose either black vinyl wrapped stainless or brush stainless steel dash cover.
- Easy to use 12-circuit wiring harness by Painless Products Inc. w/pre-assembled fuse box w & flashers
- Ignition switch w/key, headlight switch, 2- auxiliary double position toggle switches, and 1- triple wiper position switch
- Dash indicator lights include: 2-green turn signals and 1-blue bright light
- Bright light switch-floor mount style
- Pre-cut stainless steel dash panel
- Horn & horn button
- Wiring harness for electronic speedo –Painless Products Inc.
- Battery cable: 15ft heavy gauge positive battery cable w/terminal ends & eyelets
- Battery cable: 5ft heavy gauge negative ground cable w/battery terminal ends & eyelets
- Battery tray: Trunk mounted w/all necessary hold-downs.
- Speedometer sending unit, pigtail & gear
- Complete 6-gauge package includes:
- Speedometer
- Tachometer
- Oil Pressure Gauge
- Water Temperature Gauge
- Fuel Level Gauge
- Voltmeter
- Choose from black face w/chrome trim, white face w/black trim, or back face w/black trim
Complete Interior Accessories: The LS427 deluxe kit comes with a sophisticated interior kit which includes everything from the carpet padding up.
- Original style pleated seats w/lower lumbar supports for improved comfort.
- Professionally pleated door panels w/convenient side pockets
- Neatly stitched shifter & emergency brake boots made to match
- All above interior items are complemented in Argentine black Leather
- Complete custom molded carpet kit, piped and edged
- Carpet padding for cockpit
- Black OEM trunk carpeting
- Original style rear view mirror
- DOT approved door latches –improved
- Black Ford shifter handle w/knob
- 14” Grant steering wheel (listed in steering assembly
- Black leather door hinge covers
- Authentic style chromed rear view mirror
- Complete set of interior finishing screws
- 5-point racing harness set
Exterior Accessories and Lighting: In addition to the cockpit trim, the LS427 complete kit also includes exterior finishing items.
- Wiper kit, complete original style cable-drive Lucas wiper kit includes motor, wheel box, cable tube, ferrules, arms, blades, dash switch, wiring & connectors.
- Authentic Chrome-on-Brass vintage windshield, tinted with side bars & fasteners. DOT safety glass compliant
- Authentic 427 trunk lock w/key & L-shaped chromed door handles.
- Authentic license plate light and bracket w/fasteners
- Authentic 4” aluminum Lemans roller gas cap (self pressurizing)
- Authentic Hidden trunk hinges
- Authentic style Hidden hood hinges
- (2) competition hood pins
- High quality laser-cut aluminum side louvers (Chromed)
- Original style headlamp assemblies, including buckets, headlamps, trim rings, and fasteners (DOT approved).
- Original style front amber turn signals, and red rear tail-lights
- All lighting is DOT approved
Complete Pedal Box and Components: Tilton steel pedal assembly w/CAD designed mounting bracket allow you to put the pedals where you want them & utilize the roomy LS427 foot box.
- Adjustable Tilton steel pedal assembly w/bias bar
- (2) Dual Tilton brake master cylinders
- (1) Tilton clutch master cylinder
- Adjustable LoKar chromed gas pedal, stainless braided accelerator cable, carburetor return spring, & linkage w/fasteners
- Brake pressure switch and brake t-fittings.
New LS427 Assembly CD Manual: Contains over 120 pages of text and over 250 high resolution pictures and illustrations.
Fasteners: Over 1,000 top quality zinc plated, chrome and stainless USS and SAE fasteners, numbered and packaged individually by assembly.
Just add your:
- Engine/Transmission
- Rear End Differential
- Wheels/Tires
- Paint
- & Battery
*This special promotional offer cannot be combined with any other offer.
|
|
